WAVE2 2-Channel Portable Oscilloscope DIY Kit
Highlights of WAVE2:
- No. of Channels: 2
- Bandwidth: 0 – 200KHz per channel
- Sensitivity range: 5mV/DIV – 20V/DIV (using x1 probe)
- Maximum input voltage: 50Vpk (using x1 probe)
- Maximum real time sampling rate: 1MS/s
- Time Base range 10us/DIV – 500s/DIV
- X-Y Display Feature: Yes
- Built-in 0 – 20KHz (sine) dual channel DDS function generator
- Display Resolution: 320 x 240 Color display
- Display Size: 2.4″
- Touch panel: Yes
- Battery or USB powered (battery not included in DIY Kit)
- Fully contrallable via serial connection
Specification
General
- 2.4” 320x240 color display
- Touch panel operation
- Y-X mode available
- Built-in 2-channel DDS function generator
- Light weight and portable
Vertical
- Number of Channel: 2
- Analog Bandwidth: DC – 200KHz
- Sensitivity: 5mV/Div - 20V/Div (with x1 probe)
- Sensitivity error: < 5%
- Resolution: 12-bit
- Input Impedance: 1M ohm / 25pF
- Maximum Input Voltage: 50Vpk
- Coupling: DC, AC
Horizontal
- Max Real-time Sampling Rate: 1Msps (per channel)
- Timebase: 10us/Div - 500s/Div
- Record Length: 1024 points
Trigger
- Trigger Modes: Auto, Normal, Single
- Trigger Types: Rising/falling edge
- Trigger Position: 1/2 of buffer size
- Trigger Source: Ch1, Ch2, External
- Maximum external trigger voltage: 15V
- External trigger threshold: LVTTL
Function Generator
- Number of channel: 2
- Waveform type: Sine, Square, Saw-tooth, Stair
- Frequency range: DC – 20KHz (Sine)
- Amplitude range: 0 – 3V (peak value)
- Offset: 0V or +3.3V
- Duty Cycle: 0 – 100%
- Phase: -360 – 360 degree
Power Supply
- Powered on 3.7V Li-ion battery or USB
- Current consumption: ~300mA @ 3.7 – 5V
- Internal batter charger (optional)
- Automatic power off on battery
- Battery running time: Appr. 3hrs (when fully charged)
Other Features
- Y-X display mode
- On-screen measurement display
- Save / recall up to 4 captures
- Serial output of captured data
- Serial port format: LVTTL, 115200bps, 8N1
- Built-in 1KHz/3.3V test signal
- [NEW] Complete serial control interface
Physical
- Dimension: 115x72x30mm
- Weight: 0.29KG (excluding battery and probes)
