Product Description

M162 LCR Meter

M162 LCR meter is a great complimentary tool to most multi-meters. Regular multi-meters are good in many way. But they usually have rather limited or even no ability for capacitance, inductance, and sub-ohm resistance measurement. The addition of a M162 LCR meter will overcome this deficiency. The DIY kit version of M162 is very easy to build. No special calibration is required to achieve ~1% accuracy.

Highlights of M162 LCR Meter:

• Resistance range: 0.1ohm — 20M ohm
• Capacitance range: 1pF — 20mF
• Inductance range: 1uH — 20KH
• Fully automatic ranging
• Accuracy: about 1%
• Built-in virtual USB comport for data output and firmware upgrade
• Serial data output via USB comport or direct LVTTL
• Display HOLD function
• USB/Battery powered
• Easy to build, easy to use
• Optional acrylic enclosure (sold separately)

Specifications

Display

• Primary: R, C, L
• Secondary: Q, D, ESR
• Equivalent Circuit Mode: Parallel or Serial
• Primitive Data: |Z| and Θ, or Rs and Xs

Measurement Range and Accuracy

• R, |Z|: 0.1Ω - 20MΩ
• C: 1pF - 20000μF
• L: 1μH - 20000H
• Q, D: 0 - 10000
• Θ: -90° - 90°
• Accuracy: About 1% (tested for resistance 1Ω - 1MΩ)

Measurement Conditions

• Test Frequency: 100Hz, 1KHz
• Open Voltage: 0.5Vpp

Miscellaneous

• Measurement Connections: 4 Kelvin wires on the test terminals
• Ranging: Fully automatic
• Compensations: Open, Short
• Serial Data Output: Yes
• Power Supply: USB or battery
• Power Consumption: < 100mA @ 5V
• Dimensions: 111 x 76 x 25 mm (4.37" x 3.0" x 1.0")
• Weight: 100g

Payment Terms︰ tt

Product Image